Contact us
EN
EUR
  • EUR
  • USD
  • UAH

sys-logic

System window LS-SW

Add to basket

Side panel for compartment assembly CX.S.BB (section composition)

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Side compartment panel CX.S.BP (section composition)

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Compartment mounting bracket CX.S.RS (section composition)

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Horizontal divider for compartment CX.S.PA (section composition)

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Compartment support angle CX.S.UO (section composition)

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Cross-sectional profile of compartment CX.S.ACB (section composition)

Select options This product has multiple variants. The options may be chosen on the product page

Rear wall CX.ZS

Select options This product has multiple variants. The options may be chosen on the product page

Ceiling panel CX.SP

Select options This product has multiple variants. The options may be chosen on the product page

Ceiling panel with ventilation CX.SPV

Select options This product has multiple variants. The options may be chosen on the product page

Solid door CX.SD

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Double-leaf doors CX.2SD

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Double-leaf doors with perforated blinds CX.2SDG

Select options This product has multiple variants. The options may be chosen on the product page

Doors with glass CX.OD

Select options This product has multiple variants. The options may be chosen on the product page

Double-stool glass doors CX.2OD

Select options This product has multiple variants. The options may be chosen on the product page

Solid front panel CX.FP

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Modular sectional compartment panel CX.S.PSM (section composition)

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Vertical divider CX.VRV

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Bus compartment panel CX.PSV

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

System divider CX.SR

Select options This product has multiple variants. The options may be chosen on the product page
Placeholder

Cross cable rail CX.RC

Select options This product has multiple variants. The options may be chosen on the product page

Perforated front panel CX.FPP

Select options This product has multiple variants. The options may be chosen on the product page

Compartment doors solid CX.S.SD (section composition)

Select options This product has multiple variants. The options may be chosen on the product page

Inspection compartment door CX.S.OD

Select options This product has multiple variants. The options may be chosen on the product page

Jumper IP protection of the CX.S.IP compartment (section warehouse)

Select options This product has multiple variants. The options may be chosen on the product page

Mounting bracket for converting the XL-MK4 fan

Add to basket

Cable gland with nut UNO.PG

Select options This product has multiple variants. The options may be chosen on the product page

Perforated DIN-rail UNO.OM35

Add to basket

Rain cover XM-DK

Select options This product has multiple variants. The options may be chosen on the product page

Adapter corner for mounting panel CX.UA

Add to basket

Mounting plate CX.MPT1

Add to basket

Mounting plate CX.MPT2

Add to basket

Side partition CX.PB

Select options This product has multiple variants. The options may be chosen on the product page

Connecting corner of the frame CX.TI2

Add to basket

Connecting corner of the hinge CX.TI1

Add to basket

Connecting plate of the frame CX.TI3

Add to basket

Sectional modular door СХ.DSM with DIN rail

Select options This product has multiple variants. The options may be chosen on the product page

Grounding kit CX.PE

Add to basket

End rail CX.RT7 (Height, H) Outer

Select options This product has multiple variants. The options may be chosen on the product page

End rail CX.RT7 (Width, W) Outer

Select options This product has multiple variants. The options may be chosen on the product page

End rail CX.RT7 (Depth, D) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Mounting rail CX.RM7 (Width, W) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Mounting rail CX.RM7 (Depth, D) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Mounting rail CX.RM7 (Depth, D) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN7 (Width, W) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN7 (Width, W) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN7 (Depth, D) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN7 (Depth, D) Outer

Select options This product has multiple variants. The options may be chosen on the product page

End rail CX.RT5 (Height, H) Outer

Select options This product has multiple variants. The options may be chosen on the product page

End rail CX.RT5 (Width, W) Outer

Select options This product has multiple variants. The options may be chosen on the product page

End rail CX.RT5 (Depth, D) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN5 (Width, W) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN5 (Width, W) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN5 (Depth, D) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN5 (Depth, D) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Side rail CX.RB2 (Width, W) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Side rail CX.RB2 (Depth, D) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Side rail CX.RB2 (Depth, D) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN2 (Width, W) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN2 (Width, W) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN2 (Depth, D) Inner

Select options This product has multiple variants. The options may be chosen on the product page

Surface-mounted rail CX.RN2 (Depth, D) Outer

Select options This product has multiple variants. The options may be chosen on the product page

Universal corner CX.UU20

Add to basket

Enclosure XLE55

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLE55D1, single-door – W1000mm

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XL

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XL55

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLD

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLD55

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLA55

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLA

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLV55

Select options This product has multiple variants. The options may be chosen on the product page

News

XLE55 Distribution Cabinet: New Installation Opportunities

Expanding the technical capabilities of its engineering, the KUB brand introduces a new solution for efficient electrical equipment installation. The \"One-Touch\" system allows for quick and easy one-person assembly. The \"All in One\" system assumes that all installation elements are included in the cabinet. The \"Activedoor\" function increases the door load-bearing capacity. Thanks to the new feature, the entire installation process for automation and power distribution devices becomes highly efficient and cost-effective!

Solution for Data Centers. Isolated Cold/Hot Corridor.

NEW! Solution for Data Centers. Isolated Cold/Hot Corridor. The basis of all KUB solutions is product quality and complete safety of IT systems. Depending on the requirements, KUB manufactures data centers of various sizes - \"from a data center in a single cabinet\" for small enterprises and infrastructure of large data centers. Another innovation from KUB-Ukraine Plant is the new XL-3D series of IT cabinets. The XL-3D system platform includes new components of IT infrastructure, standard options, and solutions for the construction and operation of data centers. Thus, partners receive a variety of products from one source, and your requirements for data centers are met individually. Each new cabinet incorporates state-of-the-art technologies and offers you a unique experience. We invite you to explore together with us! Technical specifications of XL-3D: The height of the isolated corridor corresponds to the standard height of XL-3D cabinets: 42U, 46U The width of the isolated corridor is 1.2m (two perforated tiles) Ceiling section for air flow separation in data centers: Ceiling sections for air flow separation are attached to the top part of the cabinets to prevent the mixing of cold and hot air. The ceiling sections have a length of 600mm, 800mm, and are made of transparent 3mm-thick polycarbonate. According to fire safety regulations, this material is non-combustible. Sliding door system for air flow separation: The corridor entrance is through 1200mm wide doors. The option of doors is available: standard sliding doors with a mechanical opening system (each door leaf opens independently). The standard sliding doors are mechanical. Development, manufacturing of enclosure products, and system installation - KUB-Ukraine Plant. www.zavodkub.com

Certification for Seismic Testing

LLC \"Zavod KUB-Ukraine\" declares that the XLG55 series cabinets, in combination with a steel sheet pedestal of 100mm or 200mm, already meet the requirements for seismic zones 1, 2, and 3 as standard. * For seismic zone 4, XLG55 cabinets can be equipped with an earthquake kit in combination with a comfortable handle and seismic-resistant pedestal, and they meet the parameters for an earthquake intensity of up to 9 points on the MSK-64 scale. Since empty (unfurnished) cabinet bodies cannot be certified, this should be considered as a comparative parameter. ApplicantLLC \"Zavod KUB-Ukraine\" www.zavodkub.comEDRPOU code37026910SphereLLC \"Zavod KUB-Ukraine\" develops and manufactures products and solutions for engineering systems in the field of electrical engineering and telecommunications.DECLARED THATproducts are manufactured in accordance with the directives: EN IEC 62208:2011 DSTU ISO 9001:2015 DSTU IEC 62208:2009; GOST 14254-96; GOST 17516-90;External mechanical impact resistance (protection degree, IK code) - IK 10 Allowable static load - 1000 kg Resistance to mechanical factors - M2 Vibration resistance test report (fully presented in the October 2019 test report)test report (No. 61035) test report (No. 61035) test report (No. 61035) test report \"MSK-64\"  PROGRAM of tests for resistance to mechanical influences and seismic resistanceSMKHL.000.00.001 SBStandard surface protection Production technologyDouble surface treatment - phosphating, powder coating by spraying - provides good corrosion protection for the surface of the body.Paint descriptionPolyester powder paintColorRal 7035, texturedPurposeFor external use characterized by high resistance to atmospheric influences, UV radiation.Testing for durability Resistance to salt mist HumidityISO9227 480 hours. 1000 hours.EXPECTED SERVICE LIFE (ISO 12944-2:2017E) C1-C2 C3 C4-C5-C6Corrosion Category Environment M (5-15 years) L (2-5 years) + additional treatment- range produced;  Housings for distribution and automation systems Housings for IT equipment AISI 304 stainless steel enclosures Seismic Resistance Vibration Impacts Samples: Object: Low-voltage distribution devices \"Seismic-resistant distribution cabinets XLG55\" (test object) Name: XLG55-2086 Cabinets (2000mmx800mmx600mm) Construction type: Welded frame of steel frames. Protection class: IP55, IK10, Un, B: 1000, In, A: 2500 Load, kg: 800 Supply set: frame with a ceiling panel, lockable doors, side and rear walls, solid bottom protection, seismic resistance kit with a 200mm pedestal, grounding kit, key, packaging. Production: LLC Zavod KUB-Ukraine (UKRAINE) The test results are satisfactory according to the program of tests for resistance to mechanical influences and seismic resistance. After each test, internal and external visual inspections were carried out. No damages or degradation were detected after each test. The purpose of the preliminary tests was to verify the cabinet body\'s compliance with the requirements for resistance to mechanical influences (seismic resistance, vibration, impacts) stated in the regulatory documents (ND) Seismic test results. Note: The vibration acceleration values correspond to the parameters of NP306.5.02/3.035-2000 for an earthquake intensity of 7 points on the MSK-64 scale and an installation height of the product up to 10 m.