Contact us
EN
EUR
  • EUR
  • USD
  • UAH

Stainless

System window LS-SW

Add to basket

Mounting bracket for converting the XL-MK4 fan

Add to basket

Cable gland with nut UNO.PG

Select options This product has multiple variants. The options may be chosen on the product page

Perforated DIN-rail UNO.OM35

Add to basket

Enclosure LS66

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure with tilting roof LRS66

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure LDS55

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLS55

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLS55, single-door – W1000mm

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLDS55

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XMS66

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XMDS55

Select options This product has multiple variants. The options may be chosen on the product page

Console systems XMSPUlt

Select options This product has multiple variants. The options may be chosen on the product page

Console systems of three-section XLSPUlt

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XLS-IT

Select options This product has multiple variants. The options may be chosen on the product page

Enclosure XS-IP

Select options This product has multiple variants. The options may be chosen on the product page

Mounting panel XLE-PM

Select options This product has multiple variants. The options may be chosen on the product page

Mounting panel connector XLE-SPM

Select options This product has multiple variants. The options may be chosen on the product page

Plinth corner pieces XLE-U

Select options This product has multiple variants. The options may be chosen on the product page

Side panels for the plinth system with cable entry XLE-CBV

Select options This product has multiple variants. The options may be chosen on the product page

End panels for the plinth system XLE-CT

Select options This product has multiple variants. The options may be chosen on the product page

End panels with perforation for the plinth system XLE-CTP

Select options This product has multiple variants. The options may be chosen on the product page

End panels with cable entries for the plinth system XLE-CTV

Select options This product has multiple variants. The options may be chosen on the product page

Side panel made of stainless steel XLS55-SB

Select options This product has multiple variants. The options may be chosen on the product page

Mounting panel XM-PM

Select options This product has multiple variants. The options may be chosen on the product page

Mounting panel XL-PMW

Select options This product has multiple variants. The options may be chosen on the product page

Mounting chassis XL-MS

Select options This product has multiple variants. The options may be chosen on the product page

Vertical rail XL-RV

Select options This product has multiple variants. The options may be chosen on the product page

Angle bracket for sectional panels XL-RS

Select options This product has multiple variants. The options may be chosen on the product page

Horizontal rail XL-RH1

Select options This product has multiple variants. The options may be chosen on the product page

Horizontal rail XL-RH2

Select options This product has multiple variants. The options may be chosen on the product page

Mounting rail XL-RM

Select options This product has multiple variants. The options may be chosen on the product page

Side mounting rail XL-RMB1

Select options This product has multiple variants. The options may be chosen on the product page

Side mounting rail XL-RMB2

Select options This product has multiple variants. The options may be chosen on the product page

Partial mounting plate L-MM

Select options This product has multiple variants. The options may be chosen on the product page

Partial mounting plate XL-MM

Select options This product has multiple variants. The options may be chosen on the product page

Bridge for horizontal switches XL-MA

Select options This product has multiple variants. The options may be chosen on the product page

Sectional panel XL-PS

Select options This product has multiple variants. The options may be chosen on the product page

Sectional panel modular XL-PSM

Select options This product has multiple variants. The options may be chosen on the product page

Mounting shelf XL-PA

Select options This product has multiple variants. The options may be chosen on the product page

Mounting shelf XL-PPA

Select options This product has multiple variants. The options may be chosen on the product page

Notebook shelf for doors XL-PD

Select options This product has multiple variants. The options may be chosen on the product page

Documentation pocket XL-KM

Select options This product has multiple variants. The options may be chosen on the product page

Documentation pocket XL-KMb

Select options This product has multiple variants. The options may be chosen on the product page

Swing frame XL-RP

Select options This product has multiple variants. The options may be chosen on the product page

Universal support rail L-RUR

Select options This product has multiple variants. The options may be chosen on the product page

Narrow rail L-RU

Select options This product has multiple variants. The options may be chosen on the product page

Wide rail L-RH

Select options This product has multiple variants. The options may be chosen on the product page

Horizontal cross rail XL-RPH1

Select options This product has multiple variants. The options may be chosen on the product page

Horizontal cross rail XL-RPH15

Select options This product has multiple variants. The options may be chosen on the product page

Horizontal cross rail XL-RPH2

Select options This product has multiple variants. The options may be chosen on the product page

Internal door L-VD

Select options This product has multiple variants. The options may be chosen on the product page

Modular panel L-MP

Select options This product has multiple variants. The options may be chosen on the product page

Internal door XL-VD

Select options This product has multiple variants. The options may be chosen on the product page

Observation internal door XL-OVD

Select options This product has multiple variants. The options may be chosen on the product page

Solid internal partitioning door XL-SVD

Select options This product has multiple variants. The options may be chosen on the product page

Observation internal partitioning door XL-OSVD

Select options This product has multiple variants. The options may be chosen on the product page

Cable entry organization kit XL-OKV

Select options This product has multiple variants. The options may be chosen on the product page

Vertical divider XL-VR

Select options This product has multiple variants. The options may be chosen on the product page

Stainless steel fan protective cover XLS-ZKV

Select options This product has multiple variants. The options may be chosen on the product page

Mounting panel reinforcement XLE-UPM

Select options This product has multiple variants. The options may be chosen on the product page

Comb XL-GL

Select options This product has multiple variants. The options may be chosen on the product page

Comb L-GL

Select options This product has multiple variants. The options may be chosen on the product page

Door rail for cable channels L-RMD

Select options This product has multiple variants. The options may be chosen on the product page

Door rail XL-RMD

Select options This product has multiple variants. The options may be chosen on the product page

Bottom protection with foam rubber XL-UZD

Select options This product has multiple variants. The options may be chosen on the product page

Assembled bottom protection XL-ZD

Select options This product has multiple variants. The options may be chosen on the product page

Solid bottom protection XL-SZDZ

Select options This product has multiple variants. The options may be chosen on the product page

Bottom protection with foam rubber XL-UZDC

Select options This product has multiple variants. The options may be chosen on the product page

Decorative sectional panel XL-DSP

Select options This product has multiple variants. The options may be chosen on the product page

Stainless steel rain cover XLS-DK

Select options This product has multiple variants. The options may be chosen on the product page

Stainless steel rain cover LS-DK

Select options This product has multiple variants. The options may be chosen on the product page

News

XLE55 Distribution Cabinet: New Installation Opportunities

Expanding the technical capabilities of its engineering, the KUB brand introduces a new solution for efficient electrical equipment installation. The \"One-Touch\" system allows for quick and easy one-person assembly. The \"All in One\" system assumes that all installation elements are included in the cabinet. The \"Activedoor\" function increases the door load-bearing capacity. Thanks to the new feature, the entire installation process for automation and power distribution devices becomes highly efficient and cost-effective!

Solution for Data Centers. Isolated Cold/Hot Corridor.

NEW! Solution for Data Centers. Isolated Cold/Hot Corridor. The basis of all KUB solutions is product quality and complete safety of IT systems. Depending on the requirements, KUB manufactures data centers of various sizes - \"from a data center in a single cabinet\" for small enterprises and infrastructure of large data centers. Another innovation from KUB-Ukraine Plant is the new XL-3D series of IT cabinets. The XL-3D system platform includes new components of IT infrastructure, standard options, and solutions for the construction and operation of data centers. Thus, partners receive a variety of products from one source, and your requirements for data centers are met individually. Each new cabinet incorporates state-of-the-art technologies and offers you a unique experience. We invite you to explore together with us! Technical specifications of XL-3D: The height of the isolated corridor corresponds to the standard height of XL-3D cabinets: 42U, 46U The width of the isolated corridor is 1.2m (two perforated tiles) Ceiling section for air flow separation in data centers: Ceiling sections for air flow separation are attached to the top part of the cabinets to prevent the mixing of cold and hot air. The ceiling sections have a length of 600mm, 800mm, and are made of transparent 3mm-thick polycarbonate. According to fire safety regulations, this material is non-combustible. Sliding door system for air flow separation: The corridor entrance is through 1200mm wide doors. The option of doors is available: standard sliding doors with a mechanical opening system (each door leaf opens independently). The standard sliding doors are mechanical. Development, manufacturing of enclosure products, and system installation - KUB-Ukraine Plant. www.zavodkub.com

Certification for Seismic Testing

LLC \"Zavod KUB-Ukraine\" declares that the XLG55 series cabinets, in combination with a steel sheet pedestal of 100mm or 200mm, already meet the requirements for seismic zones 1, 2, and 3 as standard. * For seismic zone 4, XLG55 cabinets can be equipped with an earthquake kit in combination with a comfortable handle and seismic-resistant pedestal, and they meet the parameters for an earthquake intensity of up to 9 points on the MSK-64 scale. Since empty (unfurnished) cabinet bodies cannot be certified, this should be considered as a comparative parameter. ApplicantLLC \"Zavod KUB-Ukraine\" www.zavodkub.comEDRPOU code37026910SphereLLC \"Zavod KUB-Ukraine\" develops and manufactures products and solutions for engineering systems in the field of electrical engineering and telecommunications.DECLARED THATproducts are manufactured in accordance with the directives: EN IEC 62208:2011 DSTU ISO 9001:2015 DSTU IEC 62208:2009; GOST 14254-96; GOST 17516-90;External mechanical impact resistance (protection degree, IK code) - IK 10 Allowable static load - 1000 kg Resistance to mechanical factors - M2 Vibration resistance test report (fully presented in the October 2019 test report)test report (No. 61035) test report (No. 61035) test report (No. 61035) test report \"MSK-64\"  PROGRAM of tests for resistance to mechanical influences and seismic resistanceSMKHL.000.00.001 SBStandard surface protection Production technologyDouble surface treatment - phosphating, powder coating by spraying - provides good corrosion protection for the surface of the body.Paint descriptionPolyester powder paintColorRal 7035, texturedPurposeFor external use characterized by high resistance to atmospheric influences, UV radiation.Testing for durability Resistance to salt mist HumidityISO9227 480 hours. 1000 hours.EXPECTED SERVICE LIFE (ISO 12944-2:2017E) C1-C2 C3 C4-C5-C6Corrosion Category Environment M (5-15 years) L (2-5 years) + additional treatment- range produced;  Housings for distribution and automation systems Housings for IT equipment AISI 304 stainless steel enclosures Seismic Resistance Vibration Impacts Samples: Object: Low-voltage distribution devices \"Seismic-resistant distribution cabinets XLG55\" (test object) Name: XLG55-2086 Cabinets (2000mmx800mmx600mm) Construction type: Welded frame of steel frames. Protection class: IP55, IK10, Un, B: 1000, In, A: 2500 Load, kg: 800 Supply set: frame with a ceiling panel, lockable doors, side and rear walls, solid bottom protection, seismic resistance kit with a 200mm pedestal, grounding kit, key, packaging. Production: LLC Zavod KUB-Ukraine (UKRAINE) The test results are satisfactory according to the program of tests for resistance to mechanical influences and seismic resistance. After each test, internal and external visual inspections were carried out. No damages or degradation were detected after each test. The purpose of the preliminary tests was to verify the cabinet body\'s compliance with the requirements for resistance to mechanical influences (seismic resistance, vibration, impacts) stated in the regulatory documents (ND) Seismic test results. Note: The vibration acceleration values correspond to the parameters of NP306.5.02/3.035-2000 for an earthquake intensity of 7 points on the MSK-64 scale and an installation height of the product up to 10 m.